Furniture Brass Pull Handles
Furniture Brass Pull Handles
A brass pull handle is a sturdy and durable piece of hardware designed for pulling doors or drawers. Made of high-quality brass, this handle has a polished finish that adds an elegant touch to any room. The handle is designed with a comfortable grip that allows for easy and smooth pulling. Its classic and timeless design makes it suitable for a variety of decor styles, from traditional to modern. With its superior craftsmanship and durability, a brass pull handle is a reliable and stylish addition to any home or office.
| Item Code | Length×Hole Spacing | Material | Finish&Color | MOQ | N.W |
| VH0066-64 | 96*64 | Brass | Brushed Brass | 50 | 122g |
| VH0066-96 | 125*96 | Brass | Brushed Brass | 50 | 168g |
| VH0066-128 | 160*128 | Brass | Brushed Brass | 50 | 212g |
| VH0066-192 | 220*192 | Brass | Brushed Brass | 50 | 299g |
| Support Custom Size And Finishes | |||||
installation guide
Be sure to read this quick guide thoroughly before installing your handles or drawer knobs.
Making sure that you have the correct size and type of screw for the drawer/cupboard you’re fixing to is imperative to prevent damage to the handles or knobs during installation.
It is important that you don’t use an electric screwdriver when installing the handles or knobs, as they cause the screw to over tighten and snap.
For handles, t-bars and drawer knobs: to help retain their colour do not use abrasive cleaning products or equipment to clean these products.
The correct screw size: If you have a 20mm thick drawer or door and a handle/knob with a 9mm internal thread, then the 25mm screw included is appropriate.
However, if you are fixing the handle/knob to a 10mm thick drawer or door, then the 25mm screw provided is too long and you will need to source a shorter screw. The same applies if the 25mm screw provided is too short, you will need to source a longer screw. All our knobs and handles are suitable for a standard M4 machine bolt, apart from the chunky skyscrapers which are M5.
Note: If the handle/knob spins whilst installing, double check the screw length as it’s likely to be too long.
For handles, t-bars and drawer knobs we advise that you make sure the screw is no longer than the depth of the handle and drawer combined. For drawer pulls and handles we advise that you make sure the screw is shorter than the depth of the handle and drawer combined.
Important: If you are in any doubt, STOP and seek professional help. Do not proceed unless you are sure.
Cleaning & Maintenance
While our brushed solid brass cabinet hardware is lacquered to prevent corrosion, we do recommend regular cleaning with a microfibre cloth and warm soapy water followed by drying the product thoroughly. As brass is a soft material, please avoid using any harsh chemicals or abrasive cloths when cleaning.
By following the steps above you will prolong the life of the lacquer, but as with all solid brass hardware please be aware that natural aging to this beautiful material is to be expected.
Check more detail on our FAQ page.
